Home Page    Index Page    Previous    Next  

  Group 10A        FRONT SUSPENSION

Heidt's TUBULAR ‘A’ ARMS

 Made by Heidt’s Rod Shop  they are the highest quality.

 Can be used with dropped or stock spindles If using stock spindles with Tubular A arms use our disc

 brake conversion parts, see Group 22 (#22-125A Brackets etc. or complete kits) Note that upper arms

 include offset  shafts [up to 2° caster] to help with alignment problems. Also lower arms have spring

    pockets so spring height is not affected. Complete & ready to install with ball joints & urethane bushings. Also available 1 1/2" narrowed per side that can only be ordered as a set of 4. Note that this will require shortening tie rod ends.

10-060A

Upper, Steel Pr.

  

10-061A

Lower, Steel Pr.

  

10-060B

Upper, Polished Stainless Pr.

  

10-061B

Lower, Polished Stainless Pr.

  

10-060A1S

Narrowed Steel Set of 4

  

10-060A1S

Narrowed Stainless Steel Set of 4

  

 

10-066

Steel Tubular A Arms set of 4 includes bushings but no shafts or ball joints, powder coat black, an economical alternative from Auto City

 

 

For Fasteners NOT SHOWN HERE...See Group 20. 

For Stock Spindle Disc Brake Conversions see Group 22.

 

               

10-310

Front End Alignment Shim Package includes 8 ea of 1/8, 1/16, & 1/32” shims , plated.

 

10-281

Grease Fitting, straight, Ea.

 

10-282

Grease Fitting, 90° angle, Ea.

 

10-283

Grease Fitting, 90° for center link only

 

 

10-309

Upper A Arm OFFSET SHAFT provides [up to 2° caster] additional caster to solve alignment problems