Home Page    Index Page    Previous    Next

  Group 10B      Pump Sets / Column to Steering Box

                        Connections

               

                                                              'Original Power Assist Steering' (manual box)

                                                                   All use late model self-contained pump #16-154

16-142C

Stock Front Mounts Small Block SWP

319.00

16-142C1

Side Motor Mounts Small Block SWP

299.00

 

                                                                   'Rack & Pinion' Steering'

16-142D

Small or Big Block with Side Mounts specify engine & short or long water pump

274.00

 

                                                                    REMOTE TANK PUMP KITS

                                Below kits include Aluminum pulley & mounting brackets & Adjustment bar only.

                                Order hoses separately.

                                                                      Type 2 kits are V belt drive.

                                                                      Type 3 are serpentine big or small block.

M-800500

Type 2 Pump Mount Kit SB V belt 1 Gr.

158.00

M-800502

Type 2 Pump Mount Kit BB V belt 1 Gr.

158.00

M-800501

Type 3 Pump Mount Kit SB Serpentine

170.00

M-800503

Type 3 Pump Mount Kit BB Serpentine

170.00

 

TECH Note; Pump Kits

Pump Sets are designed to run standard ‘V’ belts run in the 3rd belt groove (this is the groove furthest

from engine). If you have a crank balancer with riveted pulley you’ll need to change to later model

balancer. All kits work with AC.

 

   STEERING COLUMN CONNECTION JOINTS & SHAFT

 

Steering Joint Connection Sizes

For Custom Applications

3/4-30 Splined Steering boxes: 605, Concept 1, Mid Shaft Manual 3/4 dia. with 30 splines

3/4-36 Splined Steering boxes: Short Shaft Manual & 60's GM boxes. 3/4 dia. with 36 splines

3/4 DD              3/4" diameter shaft with flats on 2 opposite sides, this can be made from a round shaft by grinding

                          in the flats

1" DD                 1" diameter shaft with flats on 2 opposite sides, many custom steering columns such as IDIDIT OR CJ

                          RODS.

17mm DD         Many GM Rack & Pinions.

1"-48 Splined   Many 60's GM Steering Column Ends. 1" dia. with 48 splines

 

                                         

 

M-99008

Upper Steering Shaft, for use with rag joint or other Couplers when stock column is to be retained. 31" long has 3/4-36 splines on steering box end

45.00

 

                                                                               

                                                               Rag Joints

Do not have to be welded.

Carefully grind 2 flat spots on either side of round steering shaft to fit in Double D end. Sold each.

10-B053149

3/4 – 30 steering box end  x ¾ DD top

109.00

10-B053449

3/4 – 36 steering box end  x ¾ DD top

109.00

10-B053152

3/4 – 30 steering box end  x 1”DD top

109.00

M-BO-SPEC

3/4 – 30 Splined Bottom x 1”-48 Splined Top 605 or Concept 1 to 63-4 Column

109.00

10-B990021

3/4 –  DD Bottom ¾-36 Splined Top

109.00