Home Page    Index Page    Previous    Next

  Group 10A        FRONT SUSPENSION

FRONT COILS SPRINGS

Recommended for All models including stock & all modified applications (even big blocks) powder coated,

 Pr. Made in USA

10-133A

Standard

80.00 R

10-133C

Lowered, lowers car 2” same ride,

80.00 C

 

Ride Height Tech Notes; New springs will be considerably higher than 50 year old original springs. With a 26" diameter tire you can expect to see 2 or more inches of air space between top of tire and wheel opening in the fender. With lowered coils  about 1 inch or more. Note requirements on other changes that can affect the ride height you wish to achieve, such as different lower A-Arms. Never use a wheel over 7" wide in the front. When using a stock spindle disc brake kit we recommend a 6" wheel width only. Any tire that can be used on the front of 55-7 will fit on a 6 or 7" wheel. Never cut more than 1 coil from any spring. Cutting 1 coil will lower the car about 1" or a little less. Bear in mind when you lower to extremes you can expect problems rubbing wheel well when wheels are cut hard [normally when you are going slow], the lower you go, the more you're gonna rub even with the above recommendations, although if followed the rubbing is 'manageable'. Compute your ride height carefully.

FRONT SWAY BARS

10-101

7/8” Diameter. Popular        aftermarket bar complete with mounting kit,

129.00*C

10-101A

1" Diameter Same as 10-101 but heavier

139.90*C

10-306

¾” Diameter exact Repro of the little known original accessory, w/the original heavy stamped A Arm brackets & hardware.

219.00*R

10-307

7/8” Diameter same as #10-306 but heavier

219.00*C

Stock Front Wheel BEARINGS

original ball bearing with races

10-135

Outer 55, (1 15/16" OD outer race)

39.90 R

10-136

Outer 56-7, (2 3/32" OD outer race)

36.90 R

10-137

Inner, 55-7 ALL

44.00 R

 

10-140

Grease Seal, Front Wheel Bearing Hub,

10.95 R

10-181

Nut & Thrust Washer, Frt. Wheel Bearing

4.90 R

 

Bearing Hub Dust/Grease CAPS

10-141

56-57, fits inside of Hub Ea.

5.95 R

10-141A

55, fits outside of Hub Ea.

12.50 R